The
Perfect size and Shape of the Swage end of tubes
means a lot for proper drawing of tube. Swaging is a
forming process in which metal is formed by a rapid
succession of hammer blows. It is chip less forming
method which increase the grain structure and
hardness of material and elongate the point which
reduce the metal loss. |
Rotary swaging is the most economical method used
for pointing comparatively smaller diameter tubes in
the metal tube manufacturing industries for Drawing
tubes, rods, and wires. |
 offer basically two Types of Rotary
Swaging Machine for Tube Pointing.
» Two Jaw Type Rotary Swaging Machine : up to 30 mm OD
Tube.
» Four Jaw Type Rotary Swaging Machine : up to 90 mm
OD Tube. |
The main structure of machine is compact and sturdy
construction. Main body of the machine and Fly wheel
are mad from Steel cast and Spindle is made from
Forged steel. The main spindle is driven by
electrical motor coupled to flywheel. The hammer
block and dies are mounted in the Spindle, blending
the rotary and gravity principle creates the regular
and accurate stroke of dies to the tubes. The dies
are accurately tapered to pull in the tubes to
reduce manual effort.
|
| Swaging Machine [JME/SW SERIES] |
| ( Please Click Here to view The Suitable Model Technical Detail ) |
